2x E-Tech BLUE Engine Spray On Enamel Paint High Temp Heat Resistant AEE02-BL

You will receive 2x E-Tech Blue Engine Enamel Spray Paint (400ml cans). This high-quality, long-lasting enamel coating is specially formulated with a ceramic resin to cope with temperatures of up to 250°C, making it suitable for use on most engine parts and components.

Ideal for engine blocks, valve/rocker covers, gearbox/differential casings, and other engine bay components. The spray-on application is simple to apply, quick drying, and provides a hard, chip-resistant, long-lasting finish that retains its colour due to the high pigment content.

Features:

• Long-lasting, high-quality finish.
• Tough, chip and crack resistant formula.
• Resists oil, engine additives, chemicals, road salt & weathering.
• Excellent durability.
• No primer needed - strong adhesion to bare steel and metal.

Product Details:

• Brand: E-Tech
• Primary Colour: Blue
• Paint Volume: 400ml per can
• Manufacturer Part Number: AEE02-BL

Important Usage Information:

Long term performance of this paint on aluminium and stainless steel surfaces cannot be guaranteed. Not suitable for brass and other non-ferrous metals.

For Best Results:

1. Ensure the engine or part you are painting, and the paint are at room temperature before use (approx 17°C to 21°C).
2. Apply in a warm, dry and dust free area.
3. Use a steel brush to remove loose dirt and rust deposits from the surface to be painted.
4. Clean the area thoroughly with a degreaser or steam cleaner, removing all traces of silicone, oil, dirt, grease etc.
5. Mask off any area that you do not want to be painted.
6. The area to be painted must be completely dry and thoroughly clean before you start.

Application:

1. Shake can vigorously for a minimum of 2 minutes before use.
2. Hold can 20-30cm (8-12") from surface and spray using a smooth side to side motion.
3. Build up layers with several thin coats, allowing approximately 15-20 minutes between coats for the surface to dry to a tacky film (do not apply heavy coats).
4. Shake can between coats.
5. After applying the final coat, allow 4 hours for the enamel to dry properly.